Precision Data Loggers
The FUZ4RTD is a 4 channel, battery powered, stand alone, RTD based, precision temperature recorder. This is an all-in-one compact, portable, easy to use device that will measure and record up to 21,845 measurements per channel. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and its small size allows it to fit almost anywhere. The QUADRTD makes data retrieval quick and easy. Simply plug it into an empty com port and our user-friendly software does the rest. See more of our data loggers by clicking below.

>> Learn More | >> Request Information
 

Split And Solid Core Current Transducers
AC current to a proportional DC voltage of 0 to 5 Volts. Used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. All models are CSA approved and UL listed.

Current Transducers Solid Core Sentry 100 Series is used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. Current Transducer Solid Core Sentry 100 Series models are CSA approved and UL listed.

>> Learn More | >> Request Information
 

WebMaster Controllers
WebMasteris the most powerful family of online process controllers in the water treatment industry. WebMaster® couples a powerful multi-I/O platform with Walchem's analytical sensors and extensive communications technologies. The result is the ability to remotely monitor and control your process from any computer, anywhere in the world, with just a standard web browser.

WebMaster requires no proprietary software and is only on the Internet when you need it. On-Demand technology reduces the cost of remote communications and provides safe and secure access to your controller. With four direct sensor inputs, WebMaster® can be configured specifically to match your system's requirements.

>> Learn More | >> Request Information
 

Top Entry Mixers From Cleveland Eastern
BHD Series Top Entry Mixers
BHD reducers are engineered and built specifically to handle the unique and demanding requirements of mixing applications. The spiral bevel/helical gear reducer is designed for the tough mixing requirements in industries like chemical processing, food processing, pulp and paper, pharmaceutical, power generation, mining and waste and water treatment.

HGD Series Top Entry Mixers
The Cleveland HGD Mixer is an economical alternative for application volumes in the range of 10,000 to 40,000 gallons. It is ideally suited for shear-sensitive materials, viscous solutions or for larger tanks where other mixers are less efficient.

Xtraflo Compact Top Entry Mixers
Xtraflo offers the most compact drive package available in slow speed mixers. Their use is ideal when the application is beyond a portable mixer's capability either because of volume or tank depth.

>> Learn More | >> Request Information
 

Altitude Control Valve
The Model 780 Altitude Control Valve, One Way Flow is an automatic control valve designed to control the high water level in reservoirs and tanks without the need for external control devices such as floats, etc. It is a pilot controlled, hydraulically operated, diaphragm actuated globe valve in either the oblique (Y) or angle pattern design. Valve differential pressure powers the diaphragm actuator open or closed.

The lower control chamber is connected through a fixed orifice to the downstream pressure, which serves to cushion the closing of the valve. The upper control chamber, which operates on a three-way control principle, has pressure applied from or pressure vented through the three-way altitude pilot.

  >> Learn More | >> Request Information
 

Biodegradable Descaler
Dynamic Descaler does not corrode, pit, erode or have any other harmful effects on materials and metals such as; STEEL, IRON, BRASS, COPPER, PLASTIC, FIBER, TEFLON or other metals or materials found in water-based systems or equipment. You can clean your equipment IN-SITU (and sometimes without shutting down the machine). Dynamic Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning.

Dynamic Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. Because Dynamic Descaler is free rinsing you do not need to neutralize or pacify the system. The uniqueness of Dynamic Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.

>> Learn More | >> Request Information
 

DFM 5.0 Doppler Flow Meter
Measure flow from outside a pipe. The Greyline DFM 5.0 is designed for "difficult liquids" that would damage regular flow meters - wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. There is no obstruction to flow and no pressure drop. The standard, strap-on ultrasonic sensor fits any pipe 1/2" (12.5 mm) Inside Diameter or larger. The electronics/display enclosure can be mounted nearby.

Use the isolated 4-20mA to transmit flow to remote displays, recorders or controllers. The 2 programmable relays (optional 4 total) can be used for flow control, pump protection or flow proportionate pulse. Calibration is easy with the built-in 5-key calibrator. Display and totalize flow in your choice of engineering units (gallons, liters etc.)

>> Learn More | >> Request Information
 

Midget Model 277 Levelometer
The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks. Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges.

These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale.

>> Learn More | >> Request Information
 

Plastic Flaw Repair
CHEM-PAK's patented Flaw Repair Products will beautifully dress your molded plastic parts by uniformly flatting the surface and masking surface condition flaws. 

These acrylic polymer and/or copolymer coatings are applied as a very thin coating. 

They mask flaws without changing the part color, UV or flammability characteristics. 

Reduce part rejects, avoid regrind problems, produce beautiful uniform parts, use right at workstation, optimize productivity.

>> Learn More | >> Request Information
 

Chemline SG Series Gauge Isolators
Chemline SG Series Gauge Isolators allow inexpensive pressure gauges, or any other pressure instrument to be used in corrosive services. The upper chamber (gauge side) is filled with a stable fluid such as glycerine‡. A diaphragm separates it from the lower chamber which receives the media under pressure.

The 1/2" gauge connection allows use of the popular 4" and 4-1/2" diameter gauges. Pressure switches or transmitters may also be installed. Customers can easily fill isolators and install their own gauges.

>> Learn More | >> Request Information
 

Quality Ultrasonic Leak Detector
This device can be used to locate costly leaks in your compressed air system. Eliminating compressed air leaks can recover a tremendous amount of energy that can be used to operate all types of nozzles, amplifiers and vortex tubes with no added cost! Air savings means free energy. An Ultrasonic Leak Detector (UDC) is typically a hand-held device that is used to locate leaks by aiming it in the direction of a suspected source of an air leak. When a leak is present, then an audible tone can be heard via the use of appropriate head-phones. The proper head phone is very important as well as sensitivity in order to distinguish air leaks from other phenomena which can be miss-interpreted, and even made worse by potential false displays form and LED or other type of display.

>> Learn More | >> Request Information
 

Melt Pressure Measurement
ONEhalf20 is a recognized leader in pressure and temperature measurement solutions for the polymer, food, medical, and chemical extrusion processing industries.

Melt pressure measurement is critical to improving processing efficiency, safety and finished goods product quality.

In a typical single or twin-screw extruder, ONEhalf20 sensors are used to measure pressure along the extruder barrel and at the screen changer, melt pump, and extruder die. At each of locations, pressure measurement detects any potential problems and helps operators ensure smooth, trouble-free processing.

>> Learn More | >> Request Information
 

Extruder Rupture Disks
Extruder Rupture Disks are designed for reliable emergency relief of excess pressure since they instantaneously rupture at a specific predetermined pressure range.

Skylark Controls model CBP Extruder Rupture Disk is designed specifically for use in plastic extruders. Each assembly consists of a stainless steel body and rupture disk. A rupture disk may be specified for primary relief in applications where pressure buildup can occur so rapidly that the response time of a relief valve is inadequate, such as in a polymerization reaction vessel.

>> Learn More | >> Request Information
  

Data Track Process Instrumenation

Our Tracker products include digital panel meters, PID controllers, signal conditioning units, remote data acquisition systems and large digit displays.

Data Track pioneered the use of a universal input, making our products highly adaptable. Unlike similar products on the market, there is no need to specify the input type for Data Track's range of panel meters, PID controllers, signal conditioners or data acquisition modules at the time you place an order.

Our DIN rail mounted Tracker 300 range of PID controllers feature single loop integrity as standard and do not require extra power supplies. For more information on Data Track process instrumentation products learn more below.

>> Learn More | >> Request Information
 

Process Controls And Instrumentation Advertising Opportunities
Your company can be a part of our web site with a Product Site with over 125,000 page views each and every month. Be a part of the Process News and reach over 52,000 readers worldwide every two weeks.

>> Learn More