|
|
EM6000 DigitAN - TRMS Three Phase Multi-function
Panel Meters
The EM6000
DigitAN panel meters are TRMS three phase multi-function panel meters
for use in control panels, motor control centers (MCCs) and genset panels.
As such EM6000 meters are compact, rugged, durable and are easily installed.
This product
is designed to measure three-phase three wire or four wire systems to
480V. It can also measure three single phase two wire systems. It is
accurate on distorted waveforms and allows the user to set transformation
ratios for both potential transformers and primary and secondary current
transformers and has a built-in phase analyzer.
|
|
|
Immersion Temperature Sensors/Probes
Fast response with spring
loading.
Immersion Temperature Sensors/Probes are used to measure teh temperature
of fluids or gases in pipes.
We spring load these Immersion Temperature Sensors/Probes to provide
a good thermal contact with the base of the mating thermowell for fast
and accurate measurements. The temperature sensor which is PC board
mounted for better reliability is potted in heat transfer compound for
rapid response and vibration protection. Our molded case with hinged
cover is easy to install. Designed to accept a 2-wire transmitter.
|
|
|
WebMaster Industrial (WIND) Controller
Walchem's WebMaster Industrial
(WIND) Controller sets a new standard for Industrial Water treatment
Controllers. The WIND has a flexible multi-I/O platform, a wide range
of analytical sensor measurement capabilities, and an extensive assortment
of integrated communications and data handling features.
- Fully integrates functions of a transmitter,
PLC, datalogger and auto-dialer into a rugged, industrial, NEMA 4X
package
- No proprietary software required to
view live data - just a web browser
- No expensive PLC programming and re-programming
- all changes made intuitively using a standard web browser
- Extensive built-in Plug-n-Play communications
options:
- Ethernet
- USB (Laptop and FlashDisk Support)
- Land line modem
- Cell modem
|
|
|
Minitwist Automatic Self Cleaning Filtration System
“Minitwist”
Model MTFC is a fully automatic, self-cleaning filtration system for
flows of 0 - 100 US GPM (23M3/H). It removes dirt as fine
as 20 micron, and uses a very small amount of water during cleaning
process. In filtration mode, flow is from bottom of filter to inside
of screen, and out. During cleaning mode, rotating nozzles collect dirt
removed from screen by reverse flow, and sends it out through top of
filter. Backwash process takes only 5 seconds.
|
|
|
NEW Nex FlowTM Air Products Corp. Catalog
Nex FlowTM
Air Products Corp., is a manufacturer of compressed air-operated products
made to improve plant efficiency, improve energy efficiency, improve
quality and enhance the environment. Our product line includes air blow-off
products that reduce air noise levels and compressed air use, and vortex
tubes technology using vortex tubes for spot cooling, control panel
cooling, tool cooling and other unique applications. It also includes
air operated conveying products and static control technology.
Nex FlowTM
Air Products Corp., introduces their new comprehensive catalog featuring
specialized compressed air technology products. This new catalog features
panel coolers, air knives, air wipes, air amplifiers, air nozzles and
jets, tool coolers, vortex tubes and spot coolers, safety air blowoff
guns, static eliminators, air operated conveyors, air optimization products
and industrial housekeeping and specialized products.
|
|
|
Standard Pump -- Drum & Container Pumps
STANDARD PUMP'S Barrel
& Container Pumps & Flow Control Systems are commonly used through
out the Food Processing, Cosmetics, Pharmaceutical, Bio Tech, Chemical
Processing, Waste Water Treatment, Plating, Medical, Semi-Conductor,
Agriculture and Petroleum industries worldwide. STANDARD's
Barrel & Container pumps are engineered to safely transfer corrosive
liquids from drums, totes and tanks. Barrel
& Container pumps are engineered to safely transfer corrosive liquids
from drums, totes and tanks. Progressive Cavity
pumps are engineered to transfer high viscosity materials from drums,
tank's and IBC's. Flow Control Systems are
engineered to control, measure and dispense any volume of liquid from
drums, IBC's plating tanks or any large storage vessel. The BCS's can
be used in any industry where batching, chemical packaging or dilution
is required to be accurate and efficient.
|
|
|
Liquid Level Float Switches
Liquid Level Float Switches
from Ktech Industrial Products Inc., Are top-mounted with between one
and four setpoints. A single point sensor may be used to provide a high
or low level alarm contact.
Liquid Level Float Switches
are factory-sealed and explosion-proof. They are approved for hazardous
locations, Class 1, Division 1, Groups B, C, D. Explosion-proof housings
are an optional accessory.
|
|
|
Portable Doppler Flow Meter Works From Outside A Pipe
Mount the ultrasonic
sensor on the outside of metal or plastic pipes and the new PDFM 5.0
Portable Doppler Flow Meter shows flow rate instantly. Designed for
wastewater, sludge, slurries, chemicals and abrasives. Use it for flow
troubleshooting, spot checks or balancing flow.
This battery-powered Flowmeter includes a backlit display, 4-20mA output
and 320,000 point data logger with USB output and software. Push button
sleep mode extends battery life for long periods of operation.
|
|
|
Back Pressure/Relief Valves
SB Series Back Pressure/Relief
Valves in solid plastics and stainless steel are now available from
Chemline Plastics. They are designed for long maintenance-free life
on chemical dosing lines ¼” to 4”. They offer reliable
opening and adjustable relief pressures of 3 to 150 psi.
Advanced hydraulic design offers high flow rates, low hysteresis, and
low overpressure to fully open. All-plastic construction (PVC, PP or
PVDF) offers high chemical resistance at reasonable cost. True union
end connections up to 2” eliminate leakage problems common with
old-fashioned threaded body valves.
|
|
|
Biodegradable Descaler
Dynamic Descaler does
not corrode, pit, erode or have any other harmful effects on materials
and metals such as; STEEL, IRON, BRASS, COPPER, PLASTIC, FIBER, TEFLON
or other metals or materials found in water-based systems or equipment.
You can clean your equipment IN-SITU (and sometimes without shutting
down the machine). Dynamic Descaler has the ability to dissolve approximately
1.5kg of calcium carbonate scale per gallon in concentrated form. It
does not need to be heated up during cleaning.
Dynamic Descaler has the ability to dissolve approximately 1.5kg of
calcium carbonate scale per gallon in concentrated form. It does not
need to be heated up during cleaning. Because Dynamic Descaler is free
rinsing you do not need to neutralize or pacify the system. The uniqueness
of Dynamic Descaler allows you to clean some equipment while still in
operation utilizing a minimum of your own personnel.
|
|
|
Temperature Control Unit Shinko NCL - 13A Series
Small
and
compact units ensures easy mounting when only limited space permits.
Four points of alarms are standard features. However, for Alarm 2, Alarm
3 and Alarm 4, the output and Energized/Deenergized functions are not
available. 18 type inputs such as thermocouple (10 types), RTD (2 types),
DC current (2 types), DC voltage (4 types) are available. Fast 0.25
second input sampling period allows applications for various processes.
Hook the NCL - 13A into the DIN rail, then fit the unit to the DIN rail.
Since the unit is fixed tightly to the DIN rail, it is resistant to
vibration, whereby ensuring ease of maintenance. Various operations
and settings can be carried out from PC's and e NCL - 33A can be connected.).
For communication protocol, Shinko protocol and Modbus protocol are
available. (For Modbus protocol, RTU mode and ASCII mode can be selected
by the DIP switch.). Connection to the open network Modbus is possible.
|
|
|
Quality Ultrasonic Leak Detector
This device can be used
to locate costly leaks in your compressed air system. Eliminating compressed
air leaks can recover a tremendous amount of energy that can be used
to operate all types of nozzles, amplifiers and vortex tubes with no
added cost! Air savings means free energy. An Ultrasonic Leak Detector
(UDC) is typically a hand-held device that is used to locate leaks by
aiming it in the direction of a suspected source of an air leak. When
a leak is present, then an audible tone can be heard via the use of
appropriate head-phones. The proper head phone is very important as
well as sensitivity in order to distinguish air leaks from other phenomena
which can be miss-interpreted, and even made worse by potential false
displays form and LED or other type of display.
|
|
|
Extruder Rupture Disks (Burst Plugs)
ONEhalf20 Extruder
Rupture Disks (Burst Plugs) are designed to provide emergency pressure
relief on plastics processing machinery.
Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered
in a variety of lengths and configurations. Rupture disks are available
with burst pressures from 1,500 up to 15,000 PSI. Offered with several
mounting thread styles that are commonly found on plastics processing
machinery.
|
|
|
Strain Indicator Recorder Vishay Model P3
The
Model P3 Strain Indicator and Recorder is a portable, battery-operated
instrument capable of simultaneously accepting four inputs from quarter-,
half-, and full-bridge strain-gauge circuits, including strain-gauge-based
transducers. Water- resistant grommets in the hinged cover allow the
lid to be closed with leadwires attached. Designed for use in a wide
variety of physical test and measurement applications, the P3 functions
as bridge amplifier, static strain indicator, and digital data logger.
The Model P3 Strain Indicator and Recorder, utilizing a large LCD display
for readout of setup information and acquired data, incorporates many
unique operating features that make it the most advanced instrument
of its kind.
|
|
|
Explosion Proof Control Panels
Explosion
Proof Control Panels for a wide variety of applications are
manufactured by Heaters Controls And Sensors. From heated control panels
that are needed to operate in 60ºC environments, to laboratory
controllers that are to maintain temperatures within +/- 0.01ºC.
These X-proof
control panels could be made to withstand wash downs with corrosive
chemicals with all components on the panel conforming to IP 65 and NEMA
7X. Integration of components for steam booster heaters or recirculation
heaters with flow fail safe interlocks are also available.
|
|
|
HANOVER MESSE
HANNOVER
MESSE remains the world's leading showcase for industrial
technology. Please find here all trade fairs of HANNOVER MESSE 2008.
Better, faster, more effective: to survive and prosper in the face of
global
competition companies need to constantly maintain and improve their
performance potential. Leading-edge technology plays a pivotal role
in
corporate competitiveness.
HANNOVER MESSE is the ideal place to obtain the latest industrial know-how.
Established sixty years ago, HANNOVER MESSE today ranks as the leading
international showplace for industrial technologies, materials and product
ideas.
Get your complimentary
entry ticket by clicking here today.
|
|
|
Process Controls And Instrumentation Advertising Opportunities
Your company can be a
part of our web site with a Product Site with over 125,000 page views
each and every month. Be a part of the Process News and reach over 52,000
readers worldwide every two weeks.
|
