|
|
Load Break Switches
LB Series Load Break Switches comply with the latest specifications for modern low voltage devices. Outstanding electrical characteristics of LB Switches with compact design, contribute to space saving installation and operational convenience. Basic construction and design of the switch makes it compact, safe and highly reliable.
The switch uses polyamide glass filled material,having excellent track resistance (CTI) for insulation to prevent flashover between phases in the most severe conditions. The special contact design and configuration makes the switch highly reliable to withstand high and short circuit currents.
|
|
|
Dual Controller Shinko WCS Series
Reduce mounting space greatly as 2-unit functions can be used with a one unit, the mounting space can be reduced by half. The Shinko WCS Series controller is available in standard DIN sizes (1/16 DIN) with a NEMA 4X protective housing. The WCS features user defined operation Controller + Timer or Dual controller. All units are manufactured to strict ISO standards and offer a full 3 year manufacturers warranty and have UL and CE Safety Approvals.
PV difference input function - Temperature difference between 2 points can be set and constantly maintained. The heat source (heater) is controlled to maintain a constant temperature difference between 2 points (A, B). (e.g.) No condensation, defogging.
|
|
|
Stainless Steel Pressure Transmitters
Model PX61 Stainless Steel Pressure Transmitters features compact construction, an integral amplifier, 2-wire 4-20mA output signal and extensive medium compatablility.
Model PX61 design provides a 1/2% accurate, low cost pressure transmitter that can operate over a wide temperature range with corrosion resistance. Available from stock in both standard and refrigerant models.
|
|
|
seepex Progressive Cavity Pumps, Macerators and Control Systems
seepex progressive cavity pumps, macerators and control systems are incorporated into a state-of-the-art quality management system. With reliable quality and high-quality material, the products meet utmost technical and qualitative customer demands. The modular system is made up of 8 product groups and 27 ranges. Manifold constructional designs facilitate purposeful adaptation to diverse operating conditions of almost all branches of industry.
|
|
|
VortexAC Cabinet Panel Coolers For Electrical Enclosures
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures!
Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C noise level is 93% less than other conventional, vortex type cabinet panel coolers. When the thermo-statically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!
This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1.5” knockout hole to keep electrical control panels cool, clean and protected.
|
|
|
Accurate Flow Measurement from Outside a Pipe
This new portable ultrasonic flowmeter is designed for clean liquids like water, glycol, oil and most chemicals. Mount the clamp-on ultrasonic sensors on the outside of plastic or metal pipes from 13-2000 mm diameter.
The PT500 Portable Transit Time Flowmeter is easy to calibrate with a simple, step-by-step calibration menu. It displays and totalizes flow and includes a built-in data logger, 4-20mA and pulse outputs. The PT500 is battery powered and packs away in a rugged, watertight carry case.
|
|
|
Quality Ultrasonic Leak Detector
This device can be used to locate costly leaks in your compressed air system. Eliminating compressed air leaks can recover a tremendous amount of energy that can be used to operate all types of nozzles, amplifiers and vortex tubes with noadded cost! Air savings means free energy. An Ultrasonic Leak Detector (UDC) is typically a hand-held device that is used to locate leaks by aiming it in the direction of a suspected source of an air leak. When a leak is present, then an audible tone can be heard via the use of appropriate head-phones. The proper head phone is very important as well as sensitivity in order to distinguish air leaks from other phenomena which can be miss-interpreted, and even made worse by potential false displays form and LED or other type of display.
|
|
|
Microtrac Toroidal Conductivity Controller
The MICROtrac is a microprocessor based feed and bleed toroidal conductivity controller designed to control conductivity and feed inhibitor in cooling tower systems. Featuring innovative toroidal sensor technology, the MICROtrac provides an economical control platform that is not susceptible to sensor fouling and never requires calibration! The MICROtrac measures the conductivity of the cooling tower recirculating water via a toroidal conductivity sensor.
|
|
|
Air Wipe Blow-Off System - Ring-BladeTM
Air Wipe Blow-Off System - Ring-BladeTM from Nex FlowTM is easy to mount and maintain and reduces both compressed air consumption and noise levels.
It produces a “laminar” flow of air along its 360º angle
using the “Coanda” effect which “entrains” a large
volume of air from the surrounding area along with the small amount
of compressed air from the Ring-BladeTM
air-saver wiper-blade to produce an output flow up to 30 times.
Air Wipe Blow-Off System - Ring-BladeTM pay back on compressed air savings can be as soon as a few weeks in some applications when compared to nozzle “rings” or simple annular slots used by other air wiping systems. Blow-off, cool & clean items like pipe, cable, wire and hose with the Air Wipe Blow-Off System Ring-BladeTM from Nex FlowTM.
|
|
|
Corporation Stops
Corporation Stops have been designed to inject chemicals into the center stream of the flow. An isolation valve allows for ease of maintenance.
Corporation Stops are available in 6 materials of construction. Wetted components have comparable or greater chemical resistance than quill construction material. Corporation Stops are available in standard and custom lengths. Connections are in NPT, Metric or flange.
|
|
|
Ramsey Mercury-Free Tilt Sensor
Now available in a mercury-free version, this sensor provides you with the stability, sensitivity and performance you have come to expect from the traditional Thermo Scientific Ramsey Tilt Switches. Designed to meet government regulations, the mercury-free tilt sensor helps you improve your efficiency while protecting your profits.
Designed to help you address environmental concerns and meet government regulations regarding mercury usage, the Thermo Scientific Ramsey Mercury-Free Tilt Sensor uses advanced technology inside the tilt probe to replicate the same performance found in traditional mercury-based Ramsey tilt switches.
|
|
|
Nex FlowTM X-StreamTM Hand Vac
Nex FlowTM The X-StreamTM Hand Vac is the low cost solution to a variety of industrial housekeeping applications. It is a blow gun, a vacuum gun, a collection system and a transfer system in one simple package.
The X-StreamTM Hand Vac is light weight die cast aluminum and uses less air than a normal blow gun. The amplified air flow is approximately 12 times the air consumption. It draws a vacuum at one end to produce a high vacuum for collection or transfer of materials. It is easily converted from a blow gun into a vacuum gun and back again.
|
|
|
Melt Pressure Gauges
Melt Pressure Gauges from ONEhalf20 are totally mechanical devices that offer ease of installation and maintenance. These melt pressure gauges are ideally suited to processors who require only visual indication of melt pressure. Melt Pressure Gauges from ONEhalf20 are available in two unique styles. The CTG style features a 6" rigid stem and 30" of flex capillary. The RTG style has only a 6" rigid stem. Other configurations of these two styles are also available. In addition ONEhalf20 also offers these same mechanical gauges with 3.3 mV/Volt transducer output, or either 4-20mA or 0 - 10 Vdc transmitter outputs. These unique gauges feature the standard Bendix style 6 pin bayonet connector and are ideal for processors looking for localized visual indication at the extruder barrel.
|
|
|
Trans-Tek Model 1003 Transducer Indicator
The Trans-Tek Model 1003 Transducer Indicator provides complete electronic support to AC and DC LVDT.s, or other DC powered transducers. The AC version provides an appropriate excitation voltage (at 3 or 7 kHz) for the LVDT and also demodulates the output, providing not only a digital readout, but a continuous analog output. This eliminates the need for a separate oscillator /demodulator. The DC version contains a dual power supply for transducers requiring both positive and negative excitation. Ideal for use in the lab or in a high speed closed loop system, this versatile indicator comes standard with a 5 digit L.E.D. readout to provide maximum resolution.
|
|
|
Multipoint Level Sensors
These multipoint level sensors are ideal for liquids that are corrosive as all wetted parts are made of stainless. Units can be made of various materials depending on the environment that the sensor will be used in. The vertically mounted multi-level FLS switches are individually designed for your application from over 360 possible combinations of floats, mounts, and material options. With up to five independent switch points, the FLS is a versatile, compact and economical way to monitor multiple liquid level points within a single tank.
|
|
|
HANOVER MESSE
HANNOVERMESSE remains the world's leading showcase for industrial
technology. Please find here all trade fairs of HANNOVER MESSE 2008.
Better, faster, more effective: to survive and prosper in the face ofglobal
competition companies need to constantly maintain and improve their
performance potential. Leading-edge technology plays a pivotal rolein
corporate competitiveness.
HANNOVER MESSE is the ideal place to obtain the latest industrial know-how.Established sixty years ago, HANNOVER MESSE today ranks as the leadinginternational showplace for industrial technologies, materials and productideas.
Get your complimentaryentry ticket by clicking here today.
|
|
|
Process Controls And Instrumentation Advertising Opportunities
Your company can be apart of our web site with a Product Site with over 125,000 page viewseach and every month. Be a part of the Process News and reach over 52,000readers worldwide every two weeks.
|
